"Low Profile" PCI cards have the same electrical properties as their counterparts in standard PCI format. Only the height of the cards is significantly reduced compared with the original size and thus allows the cards to be installed in smaller PCs. An additional slot bracket of normal size is included for installing Low Profile cards in standard housings.

Additional interface modules are connected to the interface card using flat ribbon cable and attached to a slot in the PC case. Both components can be ordered as a separate accessory for Low-Profile housing and for standard housing.

Connections and displays:

• System bus:
  • 32 Bit PCI-Bus / 33MHz / for 5V PCI systems
• Serial port:
  • 1x RS232-, RS422-, RS485 port, selectable
  • 9-pin SUB-D adapter
  • 3x non-isolated serial TTL ports
  • 12-pin header connector with 2mm spacing
• Operating modes:
  • RS232, RS422
  • RS485 2-/4-wire with handshake
  • RS485 2-/4-wire with automatic control
• Maximum baud rate:
  • 460.800 kbaud
• Data format:
  • any format
• Signals:
  • RxD, TxD, CTS, DTR
• Handshake:
  • No, RTS/CTS, Xon/Xoff
• UART:
  • 16950 with 128-byte FIFO
• Galvanic isolation:
  • Isolation voltage min. 1 KV DC
  • between PC and serial port 1
• Supply voltage:
  • 5V DC
• Current consumption:
  • typ. 200mA

Housing and other data:

• Dimensions:
  • 134 x 80mm (W x H)
• Enclosure rating:
  • IP00
• Weight:
  • approx. 90g
• Ambient temperature:
  • Storage: -40..+70°C
  • Operating: 0..+70°C
• Permissible relative humidity:
  • 5..95% RH, non-condensing
• Scope of delivery:
  • Low Profile PCI card, 1x RS232/RS422/RS485
  • slot bracket in standard size
  • Quick start manual