Serial isolator with signal refreshing

The model 88205 Isolator enables galvanically isolated connection of RS232 devices. It includes its own power source via active RS232 interface, so that operation even on power-weak RS232 ports is possible without any problems.

Interfaces:

• 2x RS232
  • 9-pin Sub-D male, DTE pinout
  • 9-pin Sub-D female, DCE pinout
• Galvanic isolation between the ports
  • Isolation voltage 1kV DC

Management and Connectivity:

• No re-configuration of transmission parameters required

Power supply:

• External
  • 12V-24V AC/DC via plug-in screw terminal
  • Galvanically isolated power connection

Standards & more

• Conforms to standards both in office and industrial environments:
  • High noise resistance per EN 61000-6-2
  • Low noise emission per EN 55032:2015 + A1 Cl. B, EN 61000-3-2 & EN 61000-3-3

Problem of potential differences:
For longer lines, it is almost impossible to prevent potential shifts between the interfaces of the connected devices. Differences in potential can result from distant lightning bolts but can also be caused during normal operation by switching of high-powered electrical devices in the vicinity. In the event of a potential shift, the data line acts as an equalizing line. Potential differences of as little as 7V can already lead to interference during data transmission. Differences of more than 30V are likely to damage the interface components. The use of electrical isolation for connections over very long distances is therefore a vital measure, which considerably increases the service life of the connected devices.

Connections and displays:

• Serial Port A:
  • RS232 Interface
  • 9-pin SUB-D socket, DCE assignment
• Serial Port B:
  • RS232 Interface
  • 9-pin SUB-D adapter, DTE assignment
• Baud rate:
  • 0..115,200 baud
• Data format:
  • any format
• Galvanic isolation:
  • min. 1kV DC between all terminals
• Max. distance:
  • 50m
• Supported signals:
  • all RS232 signals
• Supply voltage:
  • 12..24V AC/DC (±10%)
• Current consumption:
  • typ. 85mA @12V DC, 45mA @24V DC
• Supply connection:
  • Plug-in screw terminal, 5.08mm spacing
  • Labeled "L+" and "M"
• Displays:
  • 1 LED Power
  • 1 LED Data

Housing and other data:

• Housing:
  • Plastic housing for top hat rail installation
  • 105 x 22 x 75mm (L x W x H)
• Weight:
  • approx. 100g
• Ambient temperature:
  • Storage: -40..+70°C
  • Operation: 0..+60°C
• Permissible relative humidity:
  • 5..95% RH (non-condensing)
• Life expectancy:
  • > 25 years at 25°C ambient temperature
• Scope of delivery:
  • RS232 Isolator
  • Please order power supplies separately as accessories

Click here for manual: Link