(image for) Teracom Remote I/O module TCW122B-CM

Teracom Remote I/O module TCW122B-CM

Model: TCW122B-CM

$101.00

Model Remote I/O module TCW122B-CM

VLAN and MAC filters. SNMP v1 support for SNMP manager applications.

Short Description

The TCW122B-CM is a remote I/O module for environmental monitoring and control, designed to work in Ethernet networks. It can be managed by WEB interface, SNMP programs, and user applications.

The Remote I/O module has two relays with normally open and normally closed contacts. Both relays can be activated locally – from the status of monitored parameters or remotely – by WEB interface, SNMP managers, and HTTP/XML API commands.

The TCW122B-CM supports a 1-Wire interface. Two temperature or humidity-temperature sensors can be connected. Two analog voltages and status of two digital inputs can be monitored. For every parameter e-mail and/or SNMP trap for any alarm condition can be sent.

The controller can be used as a standalone device or as a part of data acquisition (SCADA) systems.

Features

* Reliable IP watchdog;
* Password protected web based configuration and control;
* 1-Wire interface for 2 temperature (TST1XX) or temperature/humidity (TSH2xx) sensors;
* 2 relay outputs with NO and NC contacts;
* 2 analog inputs with 0 to 60VDC range;
* 2 digital inputs with “dry contact” or “logic level” mode;
* SNMP v.1 support;
* SNMP trap messages sending under certain conditions;
* VLAN and MAC address filtering;
* Remote FTP firmware update.

Technical Parameters

Supply voltage, 12 ± 2 VDC
Maximum current (with all relays ON), 370ma
Weight, 110g
Dimensions, 107 x 72 x 32mm
Operating temperature, 0 to +40°C
Maximum humidity in 0 to 31°C range, 80%RH
Maximum humidity at 40°C (linear slope between 31-4°C), 50%RH
Minimum high level input voltage for digital inputs, +2.5 VDC
Maximum low level input voltage for digital inputs, +0.8 VDC
Maximum input voltage for digital inputs, +5.5 VDC
Supply voltage for 1-wire bus(VDD), 5.3 ±0.2 VDC
Maximum output current for 1-wire bus (VDD) 0.2amps.
Analog input 1 range, 0 to + 60 VDC
Analog input 2 range, 0 to + 60 VDC
Maximum switchable current for relay contacts, 3 Amp.
Maximum switchable voltage for relay contacts, 30/24 VAC/VDC

Power Supply: 12V 500mA UL-Listed Power Adapter, 100 - 240VAC to 12VDC, .5A
If a power supply is needed please order Model 18964 with the TCW122-WD.

Warranty period: 3 years

Click here for Example application: Link

Click here for product manual. Link

Please click below for complete product information at Teracom.

  • Model: TCW122B-CM
  • Shipping Weight: 1 lbs
  • Manufactured by: Teracom
  • Delivery information
  • For more information, please visit this product's webpage.
Quick buy with PayPal