Isolated RS232 to RS485 Serial Converter

The CNV3010 converter transforms data flows from RS232 to RS485 and vice versa.

Many possible configurations are possible to adapt the CNV3010 to a large amount of different uses.

Technical Data

Power Supply Voltage: From 10Vdc up to 28Vdc
Supported baud rates: Automatic, 110, 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400
Data format type supported: Automatic, 7bit, 8bit, 9bit
Parity type supported: Automatic, Nessuna, Pari, Dispari
Stop Bit number supported: Automatic, 1bit, 2bit
Data flow control (Rx / Tx) Automatic or manual by one of the following control signals: CTS, DSR, DCD, RI, RTS, DTR
Special Features: Yes/No Null-modem configuration
Yes/No Echo of characters transmitted
Termination resistor: Yes, configurable
Bias resistors: Yes, configurable
Led indicator: Power Presence, Data Reception, Data Transmission
DTE RS232 port connector: DB-9 female
DCE RS232 port connector: DB-9 male
Power supply connector: 2-pins removable terminal block
Section of cable up to AWG14
RS485 connector 3-pins removable terminal block
Section of cable up to AWG14
Dimensions: 100(H) x 22.7(L) x 119(W) mm, 3.94(H) x 0.89(L) x 4.69(W) inches
Weight: 110g, 3.9oz